Brocade Network OS Command Reference v4.1.0 User Manual
Page 448
410
Network OS Command Reference
53-1003115-01
l2traceroute
2
•
IP Protocol Type [TCP |UDP|0–255]—Enter the IP protocol type including:
•
TCP (Transmission Control Protocol) is a connection-oriented protocol, which means that it
requires handshaking to set up end-to-end communications.
•
UDP (User Datagram Protocol) is a message-based connectionless protocol.
Communication occurs by transmitting information in one direction, from the source to
the destination, without verifying the readiness of the receiver.
•
0–255 is the numeric protocol value. to use as filter.
•
The source port number. The valid port range is 0 through 65535. This is an optional field.
•
The destination port number. The valid port range is 0 through 65535. This is an optional
field.
Examples
This example shows extended commands, IP protocol type, and TCP as the IP protocol type.
switch# l2traceroute
Source mac address
: 0050.564f.549f
Destination mac address
: 0005.1ea0.8dd8
Vlan [1-3583]
: 1
Edge rbridge-id [1-239]
: 1
Extended commands [Y/N]?
: Y
Protocol Type [IP/FCoE]
: IP
Source IP address
: 192.85.1.2
Destination IP address
: 192.0.2.2
IP Protocol Type [TCP/UDP/0-255]
: TCP
Source port number [0-65535]
: 58
Dest port number [0-65535]
: 67
switch# l2traceroute
Source mac address
: 0000.0000.1111
Destination mac address
: 0000.0000.2222
Vlan [1-3583]
: 1
Edge rbridge-id [1-239]
: 50
Extended commands [Y/N]?
: n
Rbridge
Ingress
Egress
Rtt(usec)
------------------------------------------------------------------------------
50
Te 50/0/15
Te 50/0/38(isl)
0
40
Te 40/0/38(isl)
Te 40/0/2(isl)
60322
10
Te 10/0/2(isl)
Te 10/0/4(isl)
1274
20
Te 20/0/4(isl)
Te 20/0/10(isl)
1119
30
Te 30/0/10(isl)
Te 30/0/19
1787
See Also
None