Brocade Network OS Command Reference v4.1.0 - Manual (Page 900)

862 Network OS Command Reference
53-1003115-01
show ip igmp interface
2
port-channel number
Specifies the interface is a port-channel. The number of available channels
range from 1 through 63 for standalone mode, and from 1 through 6144
for Brocade VCS Fabric mode. However, the channel can be assigned any
number from 1 through 6144.
detail Displays the IGMPv3 source information.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information related to VLANs in the IGMP protocol module.
Usage Guidelines On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point
of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs
are as follows:
• On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
• On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches, and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
In logical chassis mode:
• When the rbridge-id option is specified, details for the VE interface on that particular rbridge
are displayed.
• If rbridge-id is not specified, details for the VE interface on the node on which the command is
executed is displayed.
• When rbridge-id all is specified, all VE interfaces with that rbridge-id from all the nodes in the
cluster are displayed.
Examples
switch# show ip igmp interface vlan 1
Interface Vlan 1
IGMP Snooping disabled
IGMP Snooping fast-leave disabled
IGMP Snooping querier disabled
Number of router-ports: 0
See Also None