Brocade Network OS Command Reference v4.1.0 - Manual (Page 891)

Network OS Command Reference 853
53-1003115-01
show ip dhcp relay address interface
2
Examples Display configured IP DHCP Relay addresses on a specific physical interface:
sw0# show ip dhcp relay address interface tengigabitethernet 1/0/24
Rbridge Id: 1
----------------
Interface Relay Address VRF Name
------------- ------------- ---------
Te 1/0/24 10.3.4.5 default-vrf
Te 1/0/24 10.5.1.1 blue
Display configured IP DHCP Relay addresses on VE interface for RBridge ID 1.
sw0# show ip dhcp relay addrerss int ve 300 rbridge-id 1
Rbridge Id: 1
----------------
Interface Relay Address VRF Name
------------ ---------------------- --------
Ve 300 10.0.1.2 default-vrf
Display configured IP DHCP Relay addresses on VE interface on RBridge IDs 1 and 3.
sw0# show ip dhcp relay address interface ve 300 rbridge-id 1,3
Rbridge Id: 1
----------------
Interface Relay Address VRF Name
--------- ------------- --------
Ve 300 10.0.1.2 default-vrf
Rbridge Id: 3
----------------
Ve 300 10.0.0.5 default-vrf
See Also ip dhcp relay address, show ip dhcp relay address rbridge-id