Brocade Network OS Command Reference v4.1.0 User Manual
Page 918
880
Network OS Command Reference
53-1003115-01
show ip ospf interface
2
all
Displays the information for the physical, loopback, and SVI interfaces of all
nodes in the VCS cluster. There can be multiple loopbacks and SVIs with
the same RBridge ID from different nodes.
Defaults
None
Command Modes
Privileged EXEC mode
Description
Use this command to display information about all or specific OSPF-enabled interfaces.
Usage Guidelines
If the physical interface type and name are specified, the rbridge-id option is not available.
Examples
To display information about all enabled interfaces:
switch# show ip ospf interface
TenGigabitEthernet 3/0/1 admin up, oper up
IP Address 100.1.1.1, Area 0
Database Filter: Not Configured
State passive(default none), Pri 1, Cost 1, Options 2, Type broadcast Events 0
Timers(sec): Transmit 1, Retrans 5, Hello 10, Dead 40
DR: Router ID 0.0.0.0 Interface Address 0.0.0.0
BDR: Router ID 0.0.0.0 Interface Address 0.0.0.0
Neighbor Count = 0, Adjacent Neighbor Count= 0
Authentication-Key: None
MD5 Authentication: Key None, Key-Id None , Auth-change-wait-time 300
See Also
None