Brocade Network OS Command Reference v4.1.0 - Manual (Page 984)

946 Network OS Command Reference
53-1003115-01
show policymap
2
switch# show policymap interface tengigabitethernet 4/1 input
Interface : Ten Gigabit Ethernet 4/1
Policymap: policymapA-1
Direction: Input
Input Excluded lossless priorities: None
Class-map: default
Police:
cir 5 bps cbs 5678 bytes eir 512000 bps ebs 4096 bytes
Police-priority-map: po-pr-map1
Conformed: 30720 bytes set-dscp 0 set-tc 0
Exceeded: 23424 bytes set-dscp 0 set-tc 0
Violated: 0 bytes
Total: 54144 bytes
To display policy-map binding information for all switch interfaces:
switch# show policymap
Interface : Ten Gigabit Ethernet 4/2
Inbound policy map is policymapA-1
Outbound policy map is not set
Interface : Ten Gigabit Ethernet 4/3
Inbound policy map is not set
Outbound policy map is not set
Interface : Ten Gigabit Ethernet 4/4
Inbound policy map is not set
Outbound policy map is not set
See Also show running-config policy-map, policy-map, class, qos cos, show running-config class-map