Brocade Network OS Command Reference v4.1.0 - Manual (Page 764)

726 Network OS Command Reference
53-1003115-01
show defaults threshold
2
The following example illustrates security thresholds:
sw0# show defaults threshold security
+------------+-----------------------+----------------------+--------+--------+
| | High Threshold | Low Threshold | Buffer | Time |
| Area |Value | Above | Below |Value | Below | Value | Base |
| | | Action | Action| | Action | | |
+------------+------+--------+-------+----------+-----------+--------+--------+
| Telnet | 2 | raslog | none | 1| none | 0| minute |
+------------+------+--------+-------+----------+-----------+--------+--------+
| Login | 2 | raslog | none | 1| none | 0| minute |
+------------+------+--------+-------+----------+-----------+--------+--------+
See Also show threshold monitor, threshold-monitor cpu