Brocade Network OS Command Reference v4.1.0 User Manual
Page 1273
Network OS Command Reference
1235
53-1003115-01
source
2
slot
Specifies a valid slot number.
port
Specifies a valid port number.
direction rx
Specifies to monitor the receiving traffic.
direction tx
Specifies to monitor the transmitting traffic
direction both
Specifies to monitor transmitting and receiving traffic.
Defaults
None
Command Modes
Monitor session configuration mode
Description
Use this command to enable a session for monitoring traffic.
Usage Guidelines
The source and destination ports must be in the same port-group on a Brocade VDX 6720-60.
Enter no source followed by the identifying parameters to delete the port mirroring connection for
the specified interface.
Examples
To enable session 22 for monitoring traffic:
switch(config)# monitor session 22
switch(config-session-22)# source tengigabitethernet 0/1 destination
tengigabitethernet 0/15 direction both
See Also