Brocade Network OS Command Reference v4.1.0 - Manual (Page 1115)

Network OS Command Reference 1077
53-1003115-01
show running-config interface tengigabitethernet vlan
2
show running-config interface tengigabitethernet vlan
Displays information about VLAN classification groups for a 10-gigabit Ethernet Layer 2 interface.
Synopsis show running-config interface tengigabitethernet [rbridge-id/slot/port]
vlan [classifier [activate [group]]]
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
classifier Displays VLAN classifier commands for the Layer 2 interface.
activate Displays VLAN classifier activate commands for the Layer 2 interface.
group Displays VLAN classifier activate group commands for the Layer 2 interface.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display VLAN classifier commands executed for the specified port.
Usage Guidelines None
Examples
switch# show running-config interface tengigabitethernet 1/0/49 vlan
interface tengigabitethernet 1/0/49
vlan classifier activate group 1 vlan 2
See Also show vlan classifier, switchport, vlan classifier activate group, vlan classifier group,
vlan classifier rule