Brocade Network OS Command Reference v4.1.0 User Manual
Page 1335
Network OS Command Reference
1297
53-1003115-01
system-monitor
2
threshold
Specifies the monitoring of thresholds
down-threshold
Specifies an integer value that, when exceeded, indicates when hardware
is down.
marginal-threshold Specifies an integer value that, when exceeded, indicates when
hardware is operating marginally.
Defaults
For system monitoring defaults, see the “System Monitor” chapter in the Network OS
Administrator’s Guide Supporting Network OS v.4.0.0.
Command Modes
RBridge ID configuration mode
Description
Use this command to configure field-replaceable unit (FRU) monitoring and actions. Depending on
these configuration settings, a variety of actions are generated when there is a change in FRU
state.
Usage Guidelines
Use this command in RBridge subconfiguration mode to manage the system health monitoring of
individual nodes in a cluster.
Examples
switch(config-rbridge-id-154)# system-monitor sfm threshold down-threshold 3
marginal-threshold 2
switch(config-rbridge-id-154)# system-monitor cid-card alert state faultyinserted
action email
See Also