Brocade Network OS Command Reference v4.1.0 - Manual (Page 355)

Network OS Command Reference 317
53-1003115-01
ha sync stop
2
ha sync stop
Disables high availability state synchronization on a switch.
Synopsis ha sync stop
Operands None
Defaults Synchronization is enabled.
Command Modes Privileged EXEC mode
Description Use this command to disable state synchronization.
Usage Guidelines None
Examples To disable state synchronization:
switch# ha sync stop
Are you sure you want to stop sync [y/n]? y
Service instances out of sync
2012/10/06-16:06:13, [HASM-1101], 619, M2, WARNING, VDX8770-4, HA State out of
sync.
See Also ha failover, ha enable, ha sync start