Brocade Network OS Command Reference v4.1.0 - Manual (Page 754)

716 Network OS Command Reference
53-1003115-01
show debug dhcp packet buffer
2
Protocol Type : DHCP
Packet Flow : RX
Src Port : 68 (DHCP Client)
Dst Port : 67 (DHCP Server)
Message Type : 3 (DHCP-Request)
Hardware Type : 1 (Ethernet (10Mb))
Hw Address Len : 6
Hops : 0
Transaction ID : 0
Seconds Elapsed : 0
BootP Flags : 8000
Client IP : 0.0.0.0
Your (client) IP : 0.0.0.0
Next Server IP : 0.0.0.0
Relay Agent IP : 0.0.0.0
Client MAC Add : 00:10:94:00:00:01
Server Host Name : Not Given
Boot File Name : Not Given
*********************************************
Protocol Type : DHCP
Packet Flow : TX
Src Port : 67 (DHCP Server)
Dst Port : 68 (DHCP Client)
Message Type : 5 (DHCP-Ack)
Hardware Type : 1 (Ethernet (10Mb))
Hw Address Len : 6
Hops : 1
Transaction ID : 0
Seconds Elapsed : 0
BootP Flags : 8000
Client IP : 0.0.0.0
Your (client) IP : 10.10.10.30
Next Server IP : 20.20.20.20
Relay Agent IP : 10.10.10.10
Client MAC Add : 00:10:94:00:00:01
Server Host Name : Not Given
Boot File Name : Not Given
*********************************************
See Also debug dhcp packet buffer interface, debug dhcp packet buffer clear