Brocade Network OS Command Reference v4.1.0 - Manual (Page 897)

Network OS Command Reference 859
53-1003115-01
show ip igmp groups
2
port-channel number
Specifies the interface is a port-channel. The number of available channels
range from 1 through 63 for standalone mode, and from 1 through 6144
for Brocade VCS Fabric mode. However, the channel can be assigned any
number from 1 through 6144.
detail Displays the IGMPv3 source information.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the IGMP database, including configured entries for either all groups
on all interfaces, or all groups on specific interfaces, or specific groups on specific interfaces.
Usage Guidelines The remote RBridge information is not displayed when the detail and interface operands are used.
On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point
of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs
are as follows:
• On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087
through 4095 are reserved on these switches)., and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
• On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
In logical chassis mode, when rbridge-id is specified, groups learned on Layer 3 interfaces for that
particular RBridge ID are displayed. However, groups learned on Layer 2 interfaces from all the
nodes in an entire cluster are displayed.
In logical chassis mode, if rbridge-id is not specified, IGMP groups on Layer 3 interfaces of the
node on which the command is executed are displayed. Groups learned on Layer 2 interfaces from
all the nodes in the cluster are displayed
In logical chassis mode, when rbridge-id all is specified, all groups from all the nodes in the cluster
are displayed.
Examples This is an example of a detailed output.
switch# show ip igmp groups interface tengigabitethernet 125/1/32 detail
Interface: Te 125/1/32
Group: 225.225.1.1
Uptime: 00:02:45
Expires: 00:03:56
Last reporter: 125.32.1.3
Last reporter mode: IGMP V2
This is an example of a virtual interface output.
switch# show ip igmp groups interface ve 2006
Total Number of Groups: 1
IGMP Connected Group Membership
Group Address Interface Uptime Expires Last Reporter
226.226.1.1 Vlan 2006 00:00:09 00:04:03 112.26.1.25
Member Ports: Te 125/2/12