Brocade Network OS Command Reference v4.1.0 - Manual (Page 1351)

Network OS Command Reference 1313
53-1003115-01
threshold-monitor interface
2
none Compares a data value to a threshold boundary level.
Defaults See Operands.
Command Modes RBridge ID configuration mode
Description When any monitored error crosses the configured high or low threshold, an alert is generated and
a problem port can be taken out of service. Use this command to monitor port statistics on all
external gigabit Ethernet interfaces and generate a variety of actions, from alerts through Port
Fencing.
Usage Guidelines None
Examples
switch(config-rbridge-id-154)# threshold-monitor interface policy mypolicy type
Ethernet area IFG alert above highthresh-action fence raslog lowthresh-action
email raslog
See Also rbridge-id