Brocade Network OS Command Reference v4.1.0 - Manual (Page 312)

274 Network OS Command Reference
53-1003115-01
fast-external-failover (BGP)
2
fast-external-failover (BGP)
Resets the session if a link to an EBGP peer goes down.
Synopsis fast-external-failover
no fast-external-failover
Operands None
Defaults This option is disabled.
Command Modes BGP configuration mode
Description Use this command to terminate and reset external BGP sessions of an directly adjacent peer if the
link to the peer goes down, without waiting for the timer, set by the BGP timers command, to
expire.
Usage Guidelines This can improve BGP conversion time, but can also lead to instability in the BGP routing table as a
result of a flapping interface.
Use the no form of this command to restore the default.
Examples To configure the device to reset the session if a link to an EBGP peer goes down:
switch(config)# rbridge-id 10
switch(config-rbridge-id-10)# router bgp
switch(config-bgp-router)# fast-external-failover
See Also timers (BGP)