Brocade Network OS Command Reference v4.1.0 User Manual
Page 920
882
Network OS Command Reference
53-1003115-01
show ip ospf neighbor
2
Defaults
None
Command Modes
Privileged EXEC mode
Description
Use this command to display information about OSPF neighbors.
Usage Guidelines
If the physical interface type and name are specified, the rbridge-id option is not available.
On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point
of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs
are as follows:
•
On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
•
On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
Examples
To show information about all OSPF neighbors:
switch# show ip ospf neighbor
Number of Neighbors is 2, in FULL state 1
Port
Address
Pri State
Neigh Address
Neigh ID
Ev Opt Cnt
2/2
22.22.22.1
0
FULL/OTHER 22.22.22.2
192.0.0.1
5
2
0
See Also
None