Brocade Network OS Command Reference v4.1.0 User Manual
Page 1107
Network OS Command Reference
1069
53-1003115-01
show running-config interface tengigabitethernet port-profile-port
2
show running-config interface
tengigabitethernet port-profile-port
Displays whether AMPP port-profile configuration mode is enabled for a 10-gigabit Ethernet
interface.
Synopsis
show running-config interface tengigabitethernet [rbridge-id/slot/port] port-profile-port
Operands
rbridge-id
Specifies a switch by its RBridge ID.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
Defaults
None
Command Modes
Privileged EXEC mode
Description
Use this command to display whether AMPP port-profiling is configured for the specified 10-gigabit
Ethernet interface.
Usage Guidelines
None
Examples
switch# show running-config interface tengigabitethernet 1/0/50 port-profile-port
interface tengigabitethernet 1/0/50
port-profile-port
See Also