Diag burninerrclear – Brocade Network OS Command Reference v4.1.0 User Manual
Page 256
218
Network OS Command Reference
53-1003115-01
diag burninerrclear
2
diag burninerrclear
Clears the error logs that are stored in the nonvolatile memory. These error logs are stored during
POST and systemVerification failures. Error logs are automatically cleared during system
verification.
Synopsis
diag burninerrclear
Operands
None
Defaults
None
Command Modes
Privileged EXEC mode
Description
Use this command to clear errors that are stored in the nonvolatile storage during the POST and
system verification processes.
Usage Guidelines
None
Examples
Typical output for this command.
switch# diag burninerrclear
Clearing errLog for slot M2
Clearing errLog for slot S1
Clearing errLog for slot S2
Clearing errLog for slot S3
Clearing errLog for slot L4
See Also
diag clearerror, show diag burninerrshow, show diag burninstatus