Brocade Network OS Command Reference v4.1.0 - Manual (Page 845)

Network OS Command Reference 807
53-1003115-01
show ha
2
Usage Guidelines HA is not supported in this release. All failover is disruptive. The HA commands are provided for
consistency and future expansion.
Examples To display HA status:
switch# show ha
Local (M2): Active, Cold Recovered
Remote (M1): Standby, Healthy
HA enabled, Heartbeat Up, HA State synchronized
To display HA status for all partitions:
switch# show ha all-partitions
Local (M2): Active, Cold Recovered
Remote (M1): Standby, Healthy
HA enabled, Heartbeat Up, HA State synchronized
L2/0: Active, Cold Recovered, Dual Partitions, Redundant, State in sync
1: Standby, Dual Partitions, Redundant, State in sync
See Also ha enable, ha failover, ha failover