Brocade Network OS Command Reference v4.1.0 - Manual (Page 604)

566 Network OS Command Reference
53-1003115-01
protocol lldp
2
protocol lldp
Enters the Link Layer Discovery Protocol (LLDP) configuration mode.
Synopsis protocol lldp
no protocol lldp
Operands None
Defaults The LLDP and DCBX protocols are enabled.
Command Modes Global configuration mode
Description Use this command to enter LLDP configuration mode to be able to make changes to the
parameters.
Usage Guidelines Enter no protocol lldp to restore the default settings.
Examples To reset all LLDP configurations:
switch(config)# no protocol lldp
See Also None