Brocade Network OS Command Reference v4.1.0 User Manual
Page 1066
1028
Network OS Command Reference
53-1003115-01
show running-config interface fortygigabitethernet qos
2
show running-config interface fortygigabitethernet qos
Displays the Quality of Service (QoS) configuration for a 40-gigabit Ethernet interface.
Synopsis
show running-config interface fortygigabitethernet [rbridge-id/slot/port] qos [cos | cos-mutation |
cos-traffic-class | flowcontrol [rx | tx] | trust [cos]]
Operands
rbridge-id
Specifies a switch by its RBridge ID.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
cos
Displays only the Class of Service (CoS) value configured for the interface.
cos-mutation
Displays the Cos-to-CoS mutation QoS map configured for the interface.
cos-traffic-class
Displays the CoS-to-Traffic Class QoS Map configured for the interface.
flowcontrol
Displays the activation status of QoS flow control on the interface.
rx
Displays the activation status of the receive portion of flow control for the
interface.
tx
Displays the activation status of the transmit portion of flow control for the
interface.
trust cos
Displays the configured QoS trust mode for the interface.
Defaults
Displays the full QoS configuration for the interface.
Command Modes
Privileged EXEC mode
Description
Use this command to display the QoS configuration for the specified interface.
Usage Guidelines
None
Examples
None
See Also
qos cos, qos cos-mutation, qos cos-traffic-class, qos flowcontrol tx, qos trust cos,
show qos flowcontrol interface, show qos interface, show qos queue interface,
show qos rcv-queue interface