Brocade Network OS Command Reference v4.1.0 - Manual (Page 1172)

1134 Network OS Command Reference
53-1003115-01
show running-config ssh server
2
When SSH Server Key-exchange is configured to DH Group 14:
switch# show running-config rbridge-id 3 ssh server key-exchange
rbridge-id 3
ssh server key-exchange dh-group-14
When SSH Server Key-exchange method has the default value:
switch# show running-config rbridge-id 3 ssh server key-exchange
rbridge-id 3
When SSH service is enabled:
switch# show running-config [rbridge-id rbridge-id | all] ssh server
% No entries found
See Also ssh server shutdown, show ssh server status