Brocade Network OS Command Reference v4.1.0 - Manual (Page 770)

732 Network OS Command Reference
53-1003115-01
show diag burninerrshowerrLog
2
iobuf.c, line: 648, comp:insmod, ltime:2012/06/03-07:2012/06/03-07:19:29:651740,
[DIAG-5046], 0, M1, ERROR, chassis, L3:portLoopbackTest FAILED. Err -2,
OID:0x43240000, diag_mercury_mm, line: 543, comp:diag,
ltime:2012/06/03-07:19:29:6516992012/06/03-07:29:52:276612, [DIAG-5004], 0, M1,
INFO, chassis, DIAG-MANUAL4 " L3 verify: TESTED stat FAILED 8 cmds in 1 runs Therm
10 Vib 2 in 0 hr 18 min 34 sec (0:18:34)"Err# 0140045 0900:101:000:001:0:20: ,
OID:0x43240000, iobuf.c, lineerrLog for slot L42012/06/03-07:11:17:385343,
[DIAG-5004], 0, M1, INFO, chassis, DIAG-MANUAL4 " L4 verify: Starting run Sun Jun
3 07:11:15 PDT 2012 "Err# 0140045 0A00:101:000:001:0:20: , OID:0x43280000,
iobuf.c, line: 648, comp:insmod, ltime:2012/06/03-07:2012/06/03-07:30:27:647391,
[DIAG-5004], 0, M1, INFO, chassis, DIAG-MANUAL4 " L4 verify: TESTED stat PASSED 8
cmds in 1 runs Therm 10 Vib 2 in 0 hr 18 min 55 sec (0:18:55)"Err# 0140045
0A00:101:000:001:0:20: , OID:0x43280000, iobuf.c, linerbridgeId 233M4_237_233#
See Also diag burninerrclear, diag clearerror, show diag burninstatus