Allied Telesis AT-S63 - Manual (Page 127)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Operations 127
Resetting the Port Configuration to the Defaults
You can return the parameters settings of a port to the default values.
To reset a port’s settings to the default settings, perform the following
procedure:
1. From the Main Menu, type 1 to select Port Configuration.
The Port Configuration menu is shown in Figure 25 on page 112.
2. From the Port Configuration menu, type 1 to select Port Configuration.
The following prompt is displayed:
Enter port-list ->
3. Enter the number of the port you want to reset. To reset a range of
ports, enter the first and last ports of the range, separated by a dash
(for example, 4-8). You cannot specify nonconsecutive ports (for
example, 5,7,9)
The Port Configuration menu is shown in Figure 26 on page 113.
4. From the Port Configuration menu, type D to select Set Port
Configuration to Defaults.