Allied Telesis AT-S63 - Manual (Page 193)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Operations 193
Displaying the TCP Connections
The TCP connections table lists the active Telnet, SSH, and web browser
management sessions on a switch and includes the IP addresses of the
management stations. You can use the table to determine the number of
remote, active management sessions open on a switch, as well as identify
the management stations.
To display the TCP connections table, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 54.
2. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 7 on page 61.
3. From the System Utilities menu, type 6 to select Networking Stack.
The Networking Stack menu is shown in Figure 54 on page 187.
4. From the Networking Stack menu, type 5 to select Display TCP
Connections.
An example of the Display TCP Connections menu is shown in
Figure 57.
Figure 57. Display TCP Connections Menu
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display TCP Connections
Total number of TCP Listening sockets : 2
Total number of TCP connections : 2
Index
Local Address Foreign Address State
-----------------------------------------------------------
0
0.0.0.0:80 0.0.0.0:0 LISTEN
1 0.0.0.0:23 0.0.0.0:0 LISTEN
4 169.254.37.1:23 169.254.37.138:1051 ESTABLISHED
24 169.254.37.1:80 169.254.37.101:1075 ESTABLISHED
U - Update Display
R - Return to Previous Menu
Enter your selection?