Allied Telesis AT-S63 - Manual (Page 877)

AT-S63 Management Software Menus Interface User’s Guide
877
Port Configuration Default Settings
The following table lists the port configuration default settings.
Port Configuration Setting Default
Status Enabled
10/100/1000Base-T Speed Auto-Negotiation
Duplex Mode Auto-Negotiation
MDI/MDI-X Auto-MDI/MDIX
Packet Filtering Disabled
Packet Rate Limiting Disabled
Override Priority No override
HOL Blocking Disabled
Back Pressure Disabled
Flow Control Auto
Flow Control/Back Pressure Limit 7935