Displaying lacp port and aggregator status – Allied Telesis AT-S63 User Manual
Page 174
Chapter 8: Static and LACP Port Trunks
174
Section I: Basic Features
The following prompt is displayed:
Are you sure you want to delete this aggregator (Y/N) [Yes/No]
->
6. Type Y to delete the aggregator or N to cancel the procedure.
If you entered Yes, the aggregator is deleted.
Displaying LACP
Port and
Aggregator
Status
To display LACP port and aggregator status, perform the following
procedure:
1. From the Main Menu, type 1 to select Port Configuration.
The Port Configuration menu is shown in Figure 25 on page 112.
2. From the Port Configuration menu, type 4 to select Port Trunking and
LACP.
The Port Trunking and LACP menu is shown in Figure 42 on page 160.
3. Type 2 to select LACP Configuration.
The LACP (IEEE 8023ad) Configuration menu is shown in Figure 46
on page 167.
4. To view port status, type 6 to select Show LACP Port Status. To view
aggregator status, type 7 to select Show LACP Aggregator Status.