Allied Telesis AT-S63 - Manual (Page 667)

AT-S63 Management Software Menus Interface User’s Guide
Section VI: VLANs 667
Displaying VLAN Information
To view the VLANs on the switch while the unit is operating in Multiple
VLAN mode, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Configuration.
The VLAN Configuration menu (multiple VLAN mode) is shown in
Figure 229.
Figure 229. VLAN Configuration Menu (Multiple VLAN Mode)
2. From the VLAN Configuration menu, type 5 to select Show Multiple
VLANs.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
VLAN Configuration
1 - Ingress Filtering Status ........ Enabled
2 - VLANs Mode ...................... Multiple VLANs
3 - Management VLAN ................. 1 (Default_VLAN)
4 - Configure VLANs
5 - Show Multiple VLANs
6 - Show PVIDs
R - Return to Previous Menu
Enter your selection?