Displaying acls, Figure 103: show acls menu – Allied Telesis AT-S63 User Manual
Page 317
AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations
317
Displaying ACLs
To display the ACLs on a switch, perform this procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 86 on page 289.
2. From the Security and Services menu, type 4 to select Access Control
Lists.
The Access Control Lists (ACL) menu is shown in Figure 99 on page
309.
1. From the Access Control Lists (ACL) menu, type 4 to selection Show
ACLs.
An example of the Show ACLs window is illustrated in Figure 103.
Figure 103. Show ACLs Menu
This menu is for viewing purposes only. To modify an ACL, refer to
“Modifying an ACL” on page 312. The columns in the display are
explained here:
ACL ID - The ACL’s ID number.
Description - The description of the ACL.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager
11:20:02 02-Mar-2005
Show ACLs
Number of ACLs: 12
ID
Description
Active
-------------------------------------------------------
1
IP - deny
Yes
2
HTTP - permit
Yes
3
TCP - deny
No
4
Src22.49 - deny
Yes
5
P-149.22.22.22
Yes
6
Dst22.50
Yes
7
ARP packets - deny
No
D - Detail ACL Display
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?