Allied Telesis AT-S63 - Manual (Page 270)

Chapter 13: Event Logs and Syslog Servers
270 Section II: Advanced Operations
The following message is displayed:
Saving log to file.
When the save process is complete, the word “Complete” is displayed,
followed by another prompt:
Press any key to continue.
7. Press any key.
The log file is saved in the switch’s file system as an ASCII file.
8. To view the log file, type R to return to the System Administration
menu.
9. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is displayed, as shown in Figure 7 on page
61.
10. From the System Utilities menu, type 1 to select File Operations.
The File Operations menu is displayed, as shown in Figure 60 on page
206.
11. From the File Operations menu, type 7 to select View File.
The following prompt is displayed:
Enter file name to view:
12. Type the file name with the
.log
file name extension and press
Return.