Allied Telesis AT-S63 - Manual (Page 836)

Chapter 36: TACACS+ and RADIUS Protocols
836 Section VIII: Management Security
Disabling Server-
based
Management
Authentication
To disable server-based management authentication feature on the switch
so that the device uses the standard manager and operator accounts,
perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 54.
2. From the System Administration menu, type 6 to select Authentication
Configuration.
The Authentication Configuration menu is shown in Figure 282 on
page 834.
3. From the Authentication Configuration menu, type 1 to select Server-
based Authentication.
The following prompt is displayed:
Server Based User Authentication (E-Enabled,
D-Disabled) ->
4. Type D to disable the feature. The default is disabled.
After server-based management authentication has been disabled,
future management sessions with the switch are initiated with the
standard manager and operator accounts.
5. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.