Allied Telesis AT-S63 User Manual
Page 311
Advertising
AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations
311
9. Type 5 to select Port List and, when prompted, enter the ports where
you want to assign the ACL. You can assign an ACL to just one port or
to more than one port. When entering multiple ports, you can list the
ports individually (e.g., 2,5,7), as a range (e.g., 8-12) or both (e.g., 1-
4,6,8).
10. Type C to select Create ACL.
The ACL is created on the switch and immediately activated on the
specified ports.
11. To create additional ACLs, repeat this procedure starting with step 3.
12. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Advertising