Allied Telesis AT-S63 - Manual (Page 314)

Chapter 15: Access Control Lists
314 Section II: Advanced Operations
Deleting an ACL
This procedure deletes an ACL from the switch. To perform this
procedure, you need to know the ID number of the ACL. To display ACL
ID numbers, refer to “Displaying ACLs” on page 317.
To delete an ACL, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 86 on page 289.
2. From the Security and Services menu, type 4 to select Access Control
Lists.
The Access Control Lists (ACL) menu is shown in Figure 99 on page
309.
3. From the Access Control Lists (ACL) menu, type 3 to selection Destroy
ACL.
The following prompt is displayed:
Available ACL(s): 0-15
Enter ACL ID : [0 to 255] -> 0
4. Enter the ID number of the ACL you want to modify. You can modify
only one ACL at a time.
The Destroy ACL window is displayed with the specifications of the
selected ACL. You can use this window to confirm that you are
deleting the correct ACL. An example of the window is shown in Figure
102.
Figure 102. Destroy ACL Menu
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Destroy ACL
1 - ACL ID ............ 25
2 - Description ....... UDP-deny
3 - Action ............ Deny
4 - Classifier List ... 32
5 - Port List ......... 15,22
D - Destroy ACL
R - Return to Previous Menu
Enter your selection?