Allied Telesis AT-S63 - Manual (Page 375)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 375
The policy is deleted from the switch.
7. To delete another policy, repeat this procedure starting with step 4.
8. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Displaying
Policies
To display policies, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 86 on page 289.
2. From the Security and Services menu, type 6 to select Quality of
Service.
The Quality of Service (QoS) menu is shown in Figure 115 on page
351.
3. From the Quality of Service (QoS) menu, type 3 to select Policy
Configuration.
The Policy Configuration menu is shown in Figure 128 on page 370.
4. From the Policy Configuration menu, type 4 to select Show Policies.
The Show Policies menu is shown in Figure 131.
Figure 131. Show Policies Menu
The Show Policies menu provides the following information:
ID
The policy’s ID number.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Show Policies
Number of Policies: 4
ID
Description Active
------------------------------------------------
0
P1-4 database No
1 Main video Yes
2 Dev eng Yes
3 Alt video Yes
D - Display Policy Details
U - Update Display
R - Return to Previous Menu
Enter your selection?