Allied Telesis AT-S63 - Manual (Page 306)

Chapter 15: Access Control Lists
306 Section II: Advanced Operations
You can achieve the same result by assigning each classifier to a different
ACL and assigning the ACLs to the same port, as in this example, again
for port 4.
Figure 95. ACL Example 3
Create Access Control Lists (ACL)
1 - ACL ID ................. 22
2 - Description .......... 149.22.22.-deny
3 - Action .................. Deny
4 - Classifier List ...... 24
5 - Port List .............. 4
Create Access Control Lists (ACL)
1 - ACL ID ................. 4
2 - Description .......... 149.11.11-deny
3 - Action .................. Deny
4 - Classifier List ...... 22
5 - Port List .............. 4
Create Access Control Lists (ACL)
1 - ACL ID ................. 23
2 - Description .......... 149.33.33-deny
3 - Action .................. Deny
4 - Classifier List ...... 62
5 - Port List .............. 4
Create Classifier
01 - Classifier ID: ..... 24
02 - Description: ...... 149.22.22 flow
.
.
12 - Src IP Addr: ..... 149.22.22.0
13 - Src IP Mask: .... 255.255.255.0
Create Classifier
01 - Classifier ID: ..... 22
02 - Description: ...... 149.11.11 flow
.
.
12 - Src IP Addr: ..... 149.11.11.0
13 - Src IP Mask: .... 255.255.255.0
Create Classifier
01 - Classifier ID: ..... 62
02 - Description: ...... 149.33.33 flow
.
.
12 - Src IP Addr: ..... 149.33.33.0
13 - Src IP Mask: .... 255.255.255.0