Allied Telesis AT-S63 - Manual (Page 244)

Chapter 12: File Downloads and Uploads
244 Section II: Advanced Operations
3. From the System Utilities menu, type 2 to select Downloads and
Uploads.
The Downloads and Uploads menu is shown in Figure 67 on page
230.
4. From the Downloads and Uploads menu, type 3 to select Download a
File.
The following prompt is displayed:
Download Method/Protocol [X-Xmodem, T-TFTP]:
5. To download a system file using Xmodem, go to Step 6. To download
a file using TFTP, do the following:
a. Type T.
The following prompt is displayed:
TFTP Server IP address:
b. Enter the IP address of the TFTP server.
The following prompt is displayed:
Remote File Name:
c. Enter the name of the file on the TFTP server you want to
download to the switch’s file system. You can specify only one
system file.
The following prompt is displayed:
Local File Name:
d. Enter a name for the system file. This is the name that the switch
will store the file as in its file system. To store the file on a flash
memory card in the switch rather than the file system, precede the
name with “cflash:”.
The following message is displayed:
Getting the file from Remote TFTP Server - Please wait
...
e. If you have not already done so, start the TFTP server software.
After the switch has downloaded the system file, the following
message is displayed:
File received successfully!