Allied Telesis AT-S63 - Manual (Page 351)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 351
Managing Flow Groups
This section contains the following procedures:
ˆ “Creating a Flow Group,” next
ˆ “Modifying a Flow Group” on page 354
ˆ “Deleting a Flow Group” on page 355
ˆ “Displaying Flow Groups” on page 357
Creating a Flow
Group
To create a flow group, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 86 on page 289.
2. From the Security and Services menu, type 6 to select Quality of
Service.
The Quality of Service (QoS) menu is shown in Figure 115.
Figure 115. Quality of Service (QoS) menu
3. From the Quality of Service (QoS) menu, type 1 to select Flow Group
Configuration.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Quality of Service (QoS)
1 - Flow Group Configuration
2 - Traffic Class Configuration
3 - Policy Configuration
R - Return to Previous Menu
Enter your selection?