Allied Telesis AT-S63 - Manual (Page 136)

Chapter 6: Port Parameters
136 Section I: Basic Operations
Resetting a Port
Resetting a port is useful in situations where a port is having problems
establishing a valid connection to its end node. Resetting a port does not
change any of its parameter settings.
To reset a port, perform the following procedure:
1. From the Main Menu, type 1 to select Port Configuration.
The Port Configuration menu is shown in Figure 24 on page 120.
2. From the Port Configuration menu, type 1 to select Port Configuration.
The following prompt is displayed:
Enter port-list ->
3. Enter the number of the port you want to reset. You can reset more
than one port at a time. You can specify the ports individually (for
example, 5,7,22), as a range (for example, 18-23), or both (for
example 1,5,14-22).
The Port Configuration menu is shown in Figure 26 on page 123.
4. From the Port Configuration menu, type X to select Reset Port.