Allied Telesis AT-S63 User Manual
Page 751
AT-S63 Management Software Menus Interface User’s Guide
Section VIII: Port Security
751
Note
This parameter is only available when the authenticator’s mode is
set to Single. For further information, refer to “Authenticator Ports
with Single and Multiple Supplicants” on page 729.
E - Guest VLAN
This parameter specifies the name or VID of a Guest VLAN. The
authenticator port is a member of a Guest VLAN when no supplicant is
logged on. Clients do not log on to access a Guest VLAN. To remove a
Guest VLAN without assigning a new one, enter “none”.
For further information, refer to “Guest VLAN” on page 737.
7. Repeat this procedure starting with Step 4 to configure additional
authenticator ports on the switch.
8. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.