Allied Telesis AT-S63 - Manual (Page 713)

Section VIII: Port Security 713
Chapter 30
MAC Address-based Port Security
This chapter explains how you can use the dynamic and static MAC
addresses learned or manually added to the switch’s MAC address table
to control which end nodes can forward packets through the device. The
sections in this chapter include:
ˆ “MAC Address Port Security Overview” on page 714
ˆ “Configuring MAC Address Port Security” on page 717
ˆ “Displaying Port Security Levels” on page 721
Note
This type of port security does not apply to ports located on optional
GBIC, SFP, or XFP modules.