Allied Telesis AT-S63 - Manual (Page 348)

Chapter 16: Quality of Service
348 Section II: Advanced Operations
3. From the Quality of Service (QoS) menu, type 1 to select Flow Group
Configuration.
The Flow Group Configuration menu is shown in Figure 109 on page
344.
4. From the Flow Group Configuration menu, type 3 to select Destroy
Flow Group.
The following prompt is displayed:
Available Flow Group(s): 0-10
Enter Flow Group ID : [0 to 1023] -> 0
5. Enter the ID number of the flow group you want to delete. You can
delete only one flow group at a time.
The selected flow group is displayed in the Destroy Flow Group menu.
You can use the menu to verify that you are deleting the correct group.
An example is shown in Figure 112.
Figure 112. Destroy Flow Group Menu
6. Type D to delete the flow group.
The flow group is deleted from the switch. The group is removed from
any traffic classes to which it is assigned.
7. To delete another flow group, repeat this procedure starting with step
4.
8. To permanently save your change, return to the Main Menu and type S
to select Save Configuration Changes.
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Destroy Flow Group
1 - Flow Group ID .............. 2
2 - Description ................ Video1
3 - DSCP value ................. 0
4 - Priority ................... 6
5 - Remark Priority ............ No
6 - ToS ........................
7 - Move ToS to Priority ....... No
8 - Move Priority to ToS ....... No
9 - Classifier List ............ 11
D - Destroy Flow Group
R - Return to Previous Menu
Enter your selection?