Allied Telesis AT-S63 - Manual (Page 440)

Chapter 21: SNMPv3
440 Section IV: SNMPv3
The Modify SNMPv3 Table menu is shown in Figure 144 on page 437.
4. To modify the storage type, type 3 to select Set Storage Type.
The following prompt is displayed:
Enter View Name:
5. Enter the View Name you want to modify.
The following prompt is displayed:
Enter View Subtree (OID format/Text Name):
6. Enter the View Subtree for this View Name.
The following prompt is displayed:
Enter Storage Type [V-Volatile, N-Nonvolatile]:
7. Select one of the following storage types for this table entry:
V - Volatile
Select this storage type if you do not want the ability to save an entry in
the SNMPv3 View Table to the configuration file. After making changes
to an SNMPv3 View Table entry with a Volatile storage type, the S -
Save Configuration Changes option does not appear on the Main
Menu.
N-NonVolatile
Select this storage type if you want the ability to save an entry in the
SNMPv3 View Table to the configuration file. After making changes to
an SNMPv3 View Table entry with a NonVolatile storage type, the S -
Save Configuration Changes option appears on the Main Menu,
allowing you to save your changes. Allied Telesyn recommends this
storage type.
8. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.