Allied Telesis AT-S63 - Manual (Page 444)

Chapter 21: SNMPv3
444 Section IV: SNMPv3
P-AuthPriv
This option represents authentication and the privacy protocol. Select
this security level to encrypt messages using a privacy protocol and
authenticate SNMP entities. This level provides the greatest level of
security. You can select this value if you configured the Security Model
parameter with the SNMPv3 protocol.
The following prompt is displayed:
Enter Read View Name:
7. Enter a value that you configured with the View Name parameter in the
SNMPv3 View Table.
A Read View Name allows the users assigned to this Group Name to
view the information specified by the View Table entry. This value does
not need to be unique.
The following prompt is displayed:
Enter Write View Name:
8. Enter a value that you configured with the View Name parameter in the
SNMPv3 View Table.
A Write View Name allows the users assigned to this Security Group to
write, or modify, the information in the specified View Table. This value
does not need to be unique.
The following prompt is displayed:
Enter Notify View Name:
9. Enter a value that you configured with the View Name parameter in the
SNMPv3 View Table.
A Notify View Name allows the users assigned to this Group Name to
send traps permitted in the specified View. This value does not need to
be unique.
The following prompt is displayed:
Enter Storage Type [V-Volatile, N-NonVolatile]:
10. Select one of the following storage types for this table entry:
V - Volatile
Select this storage type if you do not want the ability to save an entry in
the SNMPv3 Access Table to the configuration file. After making
changes to an SNMPv3 Access Table entry with a Volatile storage
type, the
S - Save Configuration Changes option does not appear on the Main
Menu.