Deleting a protected ports vlan, Figure 228: delete vlan menu – Allied Telesis AT-S63 User Manual
Page 673
AT-S63 Management Software Menus Interface User’s Guide
Section VI: Virtual LANs
673
Deleting a Protected Ports VLAN
To delete a protected ports VLAN, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Configuration.
2. From the VLAN Configuration menu, type 3 to select Configure
VLANs.
The Configure VLANs menu is shown in Figure 200 on page 603.
3. From the Configure VLANs menu, type 3 to select Delete VLAN.
The Delete VLAN menu is shown in Figure 228.
Figure 228. Delete VLAN Menu
4. Type 1 to select VLAN ID (VID).
The following prompt is displayed:
Enter new value -> [2 to 4094] ->
5. Enter the VID of the VLAN to be deleted. You can specify only one VID
at a time.
Note
You cannot delete the Default_VLAN, which has a VID of 1.
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager
11:20:02 02-Mar-2005
Delete VLAN
1 - VLAN ID (VID) ........
R - Return to Previous Menu
Enter your selection?