Allied Telesis AT-S63 - Manual (Page 368)

Chapter 16: Quality of Service
368 Section II: Advanced Operations
Active
The status of the policy. A policy that is assigned to one or more ports
is deemed active while a policy that is not assigned to any ports is
deemed inactive.
5. To display the specifics of a policy, type D to select Display Policy
Details.
The following prompt is displayed:
Available Policy(ies): 0-4
Enter Policy ID : [0 to 255] -> 0
6. Enter the ID number of the policy you want to view. You can display
only one policy at a time.
The Display Policy Details menu is shown in Figure 125.
Figure 125. Display Policy Details Menu
The Display Policy Details menu provides the following information:
Policy ID
The policy ID number.
Description
The policy description.
Remark DSCP
Whether the ingress DSCP value is overwritten. If All is specified, all
packets are remarked. If None is specified, the function is disabled.
The default is None.
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display Policy Details
1 - Policy ID ................ 11
2 - Description .............. policy_ca2
3 - Remark DSCP .............. None
4 - DSCP value ............... 42
5 - ToS ......................
6 - Move ToS to Priority ..... No
7 - Move Priority to ToS ..... No
8 - Send to Mirror Port ...... No
9 - Traffic Class List .......
A - Redirect Port ............
B - Ingress Port List ........ 15
D - Egress Port ..............
U - Update Display
R - Return to Previous Menu
Enter your selection?