Allied Telesis AT-S63 - Manual (Page 61)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Operations 61
The System Configuration menu is shown in Figure 5.
Figure 5. System Configuration Menu
Note
Selections 1 to 4 are described in “Displaying the IP Address of the
Local Interface” on page 705. Selection 8, ARP Cache Timeout, is
described in “Setting the ARP Cache Timeout” on page 709.
Selection T, Configure System Time, is described in “Setting the
System Time” on page 66.
3. Adjust options 5 to 7 as necessary.
5 - System Name
This parameter specifies a name for the switch (for example, Sales
Ethernet switch). The name is displayed at the top of the AT-S63
management menus and pages. The name can be from 1 to 39
characters. The name can include spaces and special characters,
such as exclamation points and asterisks. The default is no name. This
parameter is optional.
6 - Location
This parameter specifies the location of the switch, (for example, 4th
Floor - rm 402B). The location can be from 1 to 20 characters. The
location can include spaces and special characters, such as dashes
and asterisks. The default is no location. This parameter is optional.
7 - Administrator
This parameter specifies the name of the network administrator
responsible for managing the switch. The name can be from 1 to 20
characters. It can include spaces and special characters, such as
Allied Telesyn AT-9448Ts - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2006
System Configuration
1 - Eth0 Interface............. vlan2-0
2 - IP Address ................ 184.35.62.11
3 - Subnet Mask ............... 255.255.255.0
4 - Default Gateway ........... 184.35.62.4
5 - System Name ...............
6 - Location ..................
7 - Administrator .............
8 - ARP Cache Timeout ......... 150 seconds
T - Configure System Time
I - Configure Interface
R - Return to Previous Menu
Enter your selection?