Allied Telesis AT-S63 User Manual
Page 861
Advertising
AT-S63 Management Software Menus Interface User’s Guide
Section IX: Management Security
861
5. Make the desired changes to the entry by selecting the corresponding
option and entering a new value. You cannot change an entry’s ID
number. For information on an entry’s IP address, network mask, and
applications, refer to steps 5, 6, and 7 in the procedure “Creating an
ACE” on page 858.
6. After entering your changes, type M to select Modify Management ACL
Entry.
Your changes are immediately implemented on the switch.
7. After making your changes, type R until you return to the Main Menu.
Then type S to select Save Configuration Changes.
Advertising