Allied Telesis AT-S63 - Manual (Page 752)

Chapter 31: 802.1x Port-based Network Access Control
752 Section VIII: Port Security
Configuring Supplicant Port Parameters
Note
A port must already be set to the supplicant role before you can
configure its settings. For instructions on how to change the role of a
port, refer to “Setting Port Roles” on page 743.
To configure supplicant port parameters, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 79 on page 283.
2. From the Security and Services menu, type 2 to select Port Access
Control (802.1X).
The Port Access Control (802.1X) menu is shown in Figure 250 on
page 743.
3. From the Port Access Control menu, type 5 to select Configure
Supplicant.
The Configure Supplicant menu is shown in Figure 252.
Figure 254. Configure Supplicant Menu
4. From the Configure Supplicant menu, type 1 to select Configure
Authenticator Port Access Parameters.
The following prompt is displayed:
Enter port list ->
5. Enter the supplicant port number whose parameters you want to
change. You can specify one port or a range of ports (for example, 4-
8), but not multiple individual ports (for example, 4,6,11).
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Configure Supplicant
1 - Configure Supplicant Port Access Parameters
2 - Display Supplicant Port Access Parameters
R - Return to Previous Menu
Enter your selection?