Allied Telesis AT-S63 - Manual (Page 142)

Chapter 6: Port Parameters
142 Section I: Basic Operations
Clearing Port Statistics
To clear the Ethernet port statistics and reset them to “0”, perform the
following procedure:
1. From the Main Menu, type 1 to select Port Configuration.
The Port Configuration menu is shown in Figure 24 on page 120.
2. From the Port Configuration menu, type 3 to select Port Statistics.
The Port Statistics menu is shown in Figure 31 on page 139.
3. Type 2 to select Clear Statistics.
The statistics are reset to “0” and the statistics gathering starts again.