Allied Telesis AT-S63 - Manual (Page 614)

Chapter 24: Port-based and Tagged VLANs
614 Section VI: Virtual LANs
4. From the Delete VLAN menu, type 1 to select VLAN ID (VID).
The following prompt is displayed:
Enter new value -> [2 to 4094] ->
5. Enter the VID of the VLAN you want to delete. You can specify only
one VID at a time.
Note
You cannot delete the Default_VLAN, which has a VID of 1.
The Delete VLAN menu expands to contain all relevant information
about the VLAN, as shown in Figure 206. You can use this menu to
confirm that you are deleting the correct VLAN.
Figure 206. Expanded Delete VLAN Menu
6. Type D to delete the VLAN or R to cancel the procedure.
If you select to delete the VLAN, the following confirmation prompt is
displayed:
Are you sure you want to delete this VLAN [Yes/No] ->
7. Type Y to delete the VLAN or N to cancel the procedure. Press Return.
If you select Yes, the VLAN is deleted and the following message is
displayed:
SUCCESS
Please make sure to manually delete any static multicast
MAC address(es) entries for this VLAN
Press any key to continue ...
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Delete VLAN
1 - VLAN Name .............. Sales
2 - VLAN ID (VID) .......... 3
3 - VLAN Type .............. Port Based
4 - Tagged Ports ........... 7,9
5 - Untagged Ports ......... 20-24
6 - Protected Ports ........ No
D - Delete VLAN
R - Return to Previous Menu
Enter your selection?