Allied Telesis AT-S63 - Manual (Page 498)

Chapter 21: SNMPv3
498 Section IV: SNMPv3
The following prompt is displayed:
Enter Security Name:
6. Enter the name of an SNMPv1 and SNMPv2c user.
This name must be unique. Enter a value of up to 32 alphanumeric
characters.
Note
Do not use a value configured with the User Name parameter in the
SNMPv3 User Table.
The following prompt is displayed:
Enter Transport Tag:
7. Enter a name of up to 32 alphanumeric characters for the Transport
Tag.
The Transport Tag parameter is similar to the Notify Tag parameter in
the SNMPv3 Notify Table. Add the value you configure for the
Transport Tag parameter to the Tag List parameter in the Target
Address Table. In this way, the Transport Tag parameter links an
SNMPv3 Community Table entry with an entry in the SNMPv3 Target
Address Table. See “SNMPv3 Target Address Table” on page 417.
The following prompt is displayed:
Enter Storage type [V-volatile, N-NonVolatile]:
8. Select one of the following storage types for this table entry:
V - Volatile
Select this storage type if you do not want the ability to save an entry in
the SNMPv3 Community Table to the configuration file. After making
changes to an SNMPv3 Community Table entry with a Volatile storage
type, the S - Save Configuration Changes option does not appear on
the Main Menu.
N-NonVolatile
Select this storage type if you want the ability to save an entry in the
SNMPv3 Community Table to the configuration file. After making
changes to an SNMPv3 Community Table entry with a NonVolatile
storage type, the S - Save Configuration Changes option appears on
the Main Menu, allowing you to save your changes. Allied Telesyn
recommends this storage type.